Do you know how the bathtub is made of

It can be large or small, but it can withstand hundreds of kilograms of gravity.

It is glamorous, but not fleeting, with an average life span of over 6-8 years.

It seemingly simple on the surface, actually has something inside.

It is the artifact used to soak in the bath on weekdays-the bathtub.

Nowadays, the most popular in the sanitary ware market is the acrylic tub. It has a variety of shapes, light and easy to install. When you are tired or bored, you can soak in the bathtub for half an hour. Not only do you feel beautiful, but you also feel relaxed and happy. It’s such a great household artifact, do you know how it was made?

1.Own mold

To make a bathtub, we must first have a mold, which must be made of glass fiber and unsaturated resin.

2. Trial the mold

When the mold is completed, the bathtub mold needs to be polished and smoothed with 320#, 240#, 120# sandpaper, and then the mold trial is started.

3. Start to make bathtub products using acrylic sheet.

The worker fixes the acrylic sheet used to make the bathtub on the iron frame and puts it into the oven at a temperature of 190℃-200°C. After the oven is out of the oven, the baked sheet is used to apply a vacuum suction plate on the made mold to shape the acrylic sheet .

4. Mix resin, fiber, talcum powder and other materials, and pack the slurry

Use resin, talcum powder, curing agent, styrene and other materials to mix and solidify in a certain proportion, and then use the mixture and fiber to reinforce the molded product according to the required thickness. After reinforcement, wait 12 hours to lower the tank To the ground.

5. Trimming

After cutting off the extra edge of the bathtub with an edge trimmer, butt the inner and outer cylinders together.

The docking material includes resin, fiber, and gel coat.

6. polish the bathtub

Polishing is a meticulous job. Workers use 80#, 120#, 240#, 320# sandpaper to polish the cylinder body. After completion, use quick-drying putty to fill the holes and polish.

7. spray glaze

When spraying the glaze, first clean and polish, and then use the prepared glaze to spray on the cleaned place repeatedly until the opposite interface is not visible.

8. Renovation

The entire cylinder body is sprayed with glaze and then the baking process is carried out, and the cylinder body is refurbished after 24 hours. When refurbishing, use 600#, 1200#, 2000# sandpaper to process the glaze spray position. After polishing, polish it with wax, and it will meet the requirements when it is polished to the same level as the original acrylic board.

9. welding stainless steel bracket

10. Assemble the hardware and test the water

11. Packaging

After the overall production of the tub bath is completed, the surface dust of the bathtub product needs to be cleaned up, the feet are adjusted, and then put in a bubble bag--put in a cardboard box--carton packaging--wooden frame packaging--shipment.

After such a whole bathtub process, the beautiful large bathtub will be delivered to your home, adding beauty to your bathroom, lying in it and enjoying the red wine and the beautiful scenery of the bustling city by candlelight!